纸浆模塑缓冲材的技术研究

聚苯乙烯发泡塑料（EPS）作为缓冲包装的内衬件广泛用于电子产品的内包装,但其所带来的白色污染问题也日益严峻。研究以再生资源（废纸）为原料,生产产品内衬包装物——纸浆模塑缓冲材,并使其产业化,以替代发泡塑料包装物,改变发泡塑料包装物难降解所带来的污染和危害,并实现“废弃物—产品”的资源循环利用。     

纳米材料的表面修饰和表征技术

介绍了纳米粒子的表面改性及表面修饰的目的和方法,并对纳米微粒表面改性的各种方法原理及其特点进行了归纳;对纳米材料的常用分析和表征技术做了概括,主要从纳米颗粒的粒度测量、纳米微粒的表面分析、成分分析等方面进行了简要阐述;对纳米材料的表面修饰和表征技术的发展进行了展望。     

Review and future of active disassembly

Disassembly has been widely accepted as a disadvantageous end-of-life activity, but with increasing pressures from directives, such as waste on electrical and electronic equipment, and with increasing pressures to become sustainable disassembly is becoming necessary. Current disassembly methods, including both manual and automated disassembly, need improvements to meet this necessity. This paper will introduce the improvements needed and suggest through literature the validity of active disassembly (AD) to provide these improvements. Past and current research will also be considered to provide a future path for AD. This future path for AD will consider a collaborative effort to solve problems with materials, environmental triggers and costs seen with AD.     

Mg-La-Fe/沸石复合材料的制备及其处理低浓度含磷废水的性能

以沸石为载体,选用镁、镧和铁为改性剂,采用水热法制备了一种新型高效且易于磁性分离回用的载镧磁性沸石吸附剂（MLFZ）.等温吸附和动力学研究结果表明,其吸附行为符合Langmuir等温模型和准二级动力学模型,MLFZ饱和吸附量为13.46 mg·g^-1; MLFZ在pH为3～9范围内均表现出良好的吸附性能,共存离子条件下对磷酸根具有特异吸附能力,通过磁性吸附重复使用5次后,MLFZ对磷酸盐去除率维持在90%左右,突显了其易于回收再利用的优点;FTIR、 XPS和Zeta电位表征显示,表面沉积、静电吸附作用和镧与磷酸盐通过配体交换形成内层络合物在吸附过程中为主要作用.将MLFZ用于处理自然池塘污水,结果显示磷酸盐浓度由0.86 mg·L^-1降低到0.013 mg·L^-1,表明该吸附剂具有良好的实际应用前景.     

Quantification of uncertainty of experimental measurement in leaching test on cement-based materials

When mineral wastes are reused in construction materials, a current practice is to evaluate their environmental impact using standard leaching test. However, due to the uncertainty of the measurement, it is usually quite difficult to estimate the pollutant potential compared to other materials or threshold limits. The aim of this paper is to give a quantitative evaluation of the uncertainty of leachate concentrations of cement-based materials, as a function of the number of test performed. The relative standard deviations and relative confidence intervals are determined using experimental data in order to give a global evaluation of the uncertainty of leachate concentrations (determination of total relative standard deviation). Various combinations were realized in order to point out the origin of large dispersion of the results (determination of relative standard deviation linked to analytical measured and to leaching procedure), generalisation was suggested and the results were compared to literature. An actual example was given about the introduction of residue (meat and bone meal bottom ash--MBM-BA) in mortar, leaching tests were carried out on various samples with and without residue MBM-BA. In conclusion large dispersion were observed and mainly due to heterogeneity of materials. So heightened attention needed to analyse leaching result on cement-based materials and further more other tests (e.g. ecotoxicology) should be performed to evaluate the environmental effect of these materials.     

Utilization of calcite and waste glass for preparing construction materials with a low environmental load

In this study, porous calcite materials are hydrothermally treated at 200 °C using powder compacts consisting of calcite and glasses composed of silica-rich soda-lime. After treatment, the glasses are converted into calcium aluminosilicate hydrates, such as zeolite phases, which increase their strength. The porosity and morphology of new deposits of hydrothermally solidified materials depend up on the chemical composition of glass. The use of calcite and glass in the hydrothermal treatment plays an important role in the solidification of calcite without thermal decomposition.     

起居室典型材料的火灾温度场实验研究

就建筑火灾发生频率较高的起居室为研究对象,主要对该类住宅中的一些常见和使用广泛的典型家具及装修材料,纸张（报纸）、多层胶合板以及软垫分别进行了火灾燃烧实验,对火场中重要参数温度场进行了测试与分析。对由典型装修材料组成的单室,既起居室火灾进行了全尺寸火灾实验,目的是掌握起居室内火灾的发生发展、燃烧过程和火灾蔓延特点。研究表明,住宅火灾中聚合材料、人工填充泡沫等人造材料的热释放速率最大,最高可达305kW,是火灾前期起居室升温的主要热源;全尺寸火灾实验过程中火焰蔓延较快,扩展幅度较大,蔓延过程中多股火焰交叉处温度可达250％左右,容易造成火势火场传播,同时释放出大量深色烟气,火场能见度极低。全尺寸起居室实验表明,短短3min27s内火场温度达到850℃。     

聚氯乙烯电缆料老化前后的火灾危险性研究

利用微型燃烧量热计（MCC）、热重分析（TGA）、实时红外光谱（RTFTIR）以及热重-红外联用技术（TG-FT-IR）研究了PVC电缆料老化前后火灾危险性的变化。MCC结果表明,老化后的PVC的最大热释放速率增加了56.3%,总热释放量从10.6kJ/g增加到16.8kJ/g,点燃温度也由302℃提前到282℃。TG-FTIR和RTFTIR的分析结果显示,PVC的主要降解产物有水、碳氢化合物、二氧化碳和一氧化碳。PVC达到最大降解速率的温度约为240℃,与MCC、TG的结果相符合。PVC的裂解气体中包含CO2和CO,还有剧毒气体HCl。这些实验数据说明PVC材料在使用过程中火灾危险性加大,为老城区电气线路和设备的改造提供了理论依据和实验基础。     

外军皮肤防护器材化学防护性能测试与评价用标准物质研究进展

本文简迷了皮肤防护器材--化学防护服(衣)化学防护性能试验与评价用标准物质的重要性,系统地概述了外军化学防护服(衣)化学防护性能试验与评价用标准物质的研究现状,并提出了我国化学防护服(衣)防护性能试验与评价用标准物质研制过程中应注意的一些问题.     

施用农药人员的安全与防护——ASTMF2669《旋用农药人员用防护服性能标准》介绍

本文主要介绍了ASTMF2669-2009《施用农药人员用防护服性能标准》的分级和检测要求、防护服材料性能要求、材料的抗渗透性指标等,并就施药人员的安全与防护以及完善防护服标准体系提出建议．以为我国广大相关领域人员了解标准和应用标准提供帮助．